|
Outlined below are several one component ultraviolet curable coatings, adhesives, and
potting compounds. Epoxies, Etc's UV Curable systems do not require the addition of curing
agents, cure within seconds, and have unlimited working times.
 Key Benefits
- Do not require additional curing agents
- Cure within seconds
- Have unlimited working times
Go to UV Curable Equipment page
Go to Conversions, Measures, and Weights
| UV
CURABLE ADHESIVES & POTTING COMPOUNDS |
| PRODUCT |
DESCRIPTION |
DUROMETER
SHORE |
VISCOSITY
CPS |
CURE
SCHEDULE |
TENSILE
STRENGTH
PSI |
OPERATING
TEMP. °C |
| 60-7105 |
Urethane adhesive, coating, and potting compound. This system has low shrinkage and outstanding adhesion to a variety of substrates. It has good deep section curing which makes it an ideal choice for many potting applications. |
78D |
3,000 |
12 Seconds with UV Cure 100 Spot Cure |
5,000 |
-50
to +155 |
| 60-7106 |
Filled UV curable encapsulant with a low CTE. Excellent adhesion
and electrical insulation. |
90D |
80,000 |
15 Seconds with UV Cure 100 Spot Cure |
2,500 |
-40
to +150 |
| 60-7107 |
Filled
UV curable encapsulant with a low CTE. Excellent adhesion
and electrical insulation.. |
90D |
35,000 |
15 Seconds
with UV Cure 100 Spot Cure |
2,500 |
-40
to +150 |
| 60-7108 |
Optically clear adhesive and potting compound. Suitable for outdoor applications. |
80D |
800 |
12 Seconds with UV Cure 100 Spot Cure |
3,300 |
-50
to +155 |
| 60-7111 |
Electronic grade system
that is flexible and will not stress
sensitive electronic components. Good flexibility and
weather resistance. |
80A/30D |
3,500 |
10 Seconds
with UV Cure 100 Spot Cure |
1,500 |
-50
to
+155 |
| 60-7114 |
Low
viscosity potting compound and adhesive designed for
moisture & chemical
resistance. Good electrical insulation properties
and adhesion to difficult substrates. |
50D |
3,000 |
2
Seconds
with UV Cure 100 Spot Cure |
1,500 |
-50
to +155 |
| 60-7155 |
Low
viscosity modified epoxy. Designed to cure with low or
high intensity light. Forms glass like bubble free finish. |
70D |
1,000 |
15
Minutes With Black Light or 10 seconds with UV Cure 100 Spot Cure |
6,200 |
-50
to +200 |
| 60-7156 |
Flexible UV Curable Adhesive & Potting Compound. |
95A |
600 |
2 - 5 Seconds with UV Cure 100 Spot Cure |
6,200 |
-50
to +200 |
| 60-7158 |
Bonds
well to aluminum and most metals. It is high in viscosity
and will not run once applied. This UV Epoxy is semi-rigid
and is water and chemical resistant. Cures very quickly
with little shrinkage.
|
82D |
20,000 |
2-5
Seconds with UV
100 Spot Cure. |
3,800 |
-40
to +135 |
| 60-7159 |
A low viscosity conformal coating for PCB's, components, and various
substrates. Forms a tough, clear and flexible coating that resists
yellowing, vibration, and impact. |
75D |
450 |
20-30 Seconds with UV
100 Spot Cure. |
3,850 |
-40
to +135 |
| 60-7170 |
Higher
viscosity version of 60-7155. Used primarily as an adhesive
and encapsulant. Ultimate in clarity. Will "shadow"
cure. |
70D |
4,500 |
15
Minutes With Black Light or 10 Seconds with UV Cure 100 Spot Cure |
6,200 |
-50
to +200 |
|
IMPORTANT: The information in this table is based on
data obtained by our own research and is considered accurate. However, no warranty is
expressed or implied regarding the accuracy of these data, the results to be obtained from
the use thereof, or that any such use will not infringe any patent. This information is
furnished upon the condition that the person receiving it shall make his own tests to
determine the suitability thereof for his particular purpose.
Having trouble deciding on which of our UV Curable products best meets your
requirements? Then let us assist you in selecting a product by using our online Product Selection Form. If we do not have an existing product that
meets your requirements, we will develop one!
|
