Electrically Conductive

Circuit Board with Electrically Conductive Coating

Listed below are several of our electrically conductive adhesives and coatings. Epoxies, Etc. has engineered these materials to satisfy the requirements of many demanding coating and bonding applications that require electrical conductivity. These products are often selected as alternatives to lead free soldering due to lower cure temperatures.

One and two component systems are available. We can also specialize your packaging, whether you want your products packed in FeezeBond® premixed and frozen syringes, or supplied in hinge-packs. Not all electrically conductive adhesives and coatings are listed, and custom formulations are available upon consultation.

swipe
Short DescriptionMix RatioViscosity, cPVolume Resistivity, ohm-cm Operating Temperature Range, ºC PDF
40-3900
Two component epoxy adhesive filled with pure silver
100:100Paste0.0001-50 to +170
40-3905
Two component silver filled epoxy adhesive
100:5Paste0.0001-60 to +135
40-3907
Two component fast thin film set silver filled epoxy
100:8Paste.002-60 to +135
40-3909
Two component silver coated nickel filled epoxy resin
100:100Creamy Paste.005-40 to +135
40-3911
One component silver filled epoxy adhesive
No Catalyst RequiredPaste.000534-55 to +170
40-3920
One component electrically conductive ink
No Catalyst Required15,000.0002-20 to +140

Having trouble deciding on which of our products best meets your requirements? Then let us assist you in selecting a product by using our online Product Selection Form. If we do not have an existing product that meets your requirements, we will develop one!

IMPORTANT:
EPOXIES, ETC. MAKES NO EXPRESS OR IMPLIED WARRANTIES OR MERCHANTABILITY, FITNESS OR OTHERWISE WITH RESPECT TO ITS PRODUCTS. The information in this brochure is based on data obtained by our own research and is considered reliable. However, no warranty is expressed or implied regarding the accuracy of these data, the results to be obtained from the use thereof, or that any such use will not infringe any patent. The properties given are typical values and are not intended for use in preparing specifications. This information is furnished upon the condition that the person receiving it shall make his own tests to determine the suitability thereof for his particular purpose.