Shot Gun 2 Adhesive Dispenser

The Shot Gun 2 bridges the gap between hand-held systems and expensive meter mix equipment.    TriggerBond Dual Barrel Cartridges are easily loaded into the Shot Gun 2 Adhesive Dispenser for hands free dispensing of adhesives and potting compounds.  This dispenser increases productivity, eliminates adhesive waste, reduces operator fatigue, and can be configured for 50ml, 200ml, or 400ml cartridges.  Shot timers can be added to assure uniform and repeatable material dispensing.  Pinch valves can also be added for low viscosity materials to prevent dripping.
  

DXB Meter Mix Dispenser

The DXB Bench Dispenser is a highly versatile and economic dispensing system. The A and B components of flowable adhesive systems are gravity fed from separate refillable 2.5 gallon containers through an integral DXB Dispenser. The DXB Dispenser offers point-of-application metering which ensures dispensing in precise ratios directly into a static mixer.  This bench-top unit, which comes with a foot pedal actuator, allows for a hands-free operation that guarantees a reproducible production process. The stand is fully adjustable over three axes and can accommodate a wide range of product applications.

UV-Cure 100 Spot Cure

UV Cure 100 is a high intensity Ultraviolet light source capable of delivering 20 W/Cm2 of output. The adjustable iris setting in 1% increments allows users to control the output intensity. The UV-Cure 100 has a small footprint and therefore takes up little space in workstations. The 100-watt lamp has a life of 2000 plus hours. The foot pedal is standard for convenient hands free operation.

UV-Cure 100 Manual

UV-Radiometer 2000

The UV-Radiometer accurately measures power and irradiance. Provides process control by measuring the actual amount of light seen by the adhesive. This is a portable device with user-friendly controls and an easy to read display.

Light Guide Stand

Provides an easy means to precisely fixture the UV-Cure Light Guides. Height adjusts from 0mm to 150 mm. Holds 2,3,5 and 8mm UV-Cure Light Guides.

This air operated pneumatic dispenser is available for 5cc, 10cc, 30cc, and 55cc syringe dispensing. This is a popular dispenser for resin systems with long working times such as epoxies and UV Curables. A variety of needles ranging in size from 14-30 gauge allow easy control of material dispensing. This dispenser is economical and easy to set up. Please specify desired syringe size when ordering. Dispenser, syringes, and needles are stocked for quick delivery.

The Digital Shot Meter is an advanced dispenser that can be operated in manual or timed mode. Operators have the ability to dispense in time from .01 to 99.9 seconds. Even when in manual mode the dispenser displays the amount of time during the first dispense operation. An advanced feature in the timed mode is the ability to control the interval time between measured shots. The operator is able to keep the pedal depressed and the Digital Shot Meter will automatically dispense timed measured shots with an adjustable delay between dispensed shots. The dispenser can be activated by the foot peddle or Shot Button on the front panel. It's vacuum feature prevents dripping. Please provide desired syringe size when ordering. A variety of needles ranging in size from 14-30 gauge allow easy control of material dispensing.

The Measured Shot Meter Dispenser provides timed controlled shots for reproducibility. Time duration shots can be adjusted from .01 to 99.99 seconds. It can also run in manual mode. This dispenser is ideal for low and high viscosity epoxy, urethane, or silicone systems. It's vacuum feature prevents dripping. Please specify desired syringe size when ordering. A variety of dispensing needles ranging in size from 14-30 gauge allow easy control of material dispensing.
 

This is a Black Light UV curing lamp designed for use with our UV Cure 7155. When exposed to this lamp, the UV Cure 7155 will cure within 15-20 minutes. The lamp is provided with two black light tubes. It is four feet long and six inches wide. The inside of the housing is a highly polished surface that allows 100% reflection to the substrates. This Black Light UV Curing Lamp was specifically designed to properly and efficiently cure the UV Cure 7155.